Working principle: stepper motor drive

Transmission structure: ball screw drive

Liquid volume accuracy: <=1.0% (1 ml syringe and above)

Liquid volume accuracy: repeatability error <=0.05% (full stroke, 500uL syringe and above)

Rated stroke: 60mm (6000 steps)

Rated travel time range: 1.2s-1200s

Line speed range: 0.05mm/s-50mm/s

Control resolution: standard mode: control resolution is 1 step 0.01mm; microstep mode: control resolution is 1 step 1.25um

The maximum driving force of the piston: ≥68N

Piston secondary driving force: ≥34N

Pipeline interface: 1/4″-28 internal thread interface

Syringe interface: 1/4″-28 internal thread interface

Valve Type: Standard: 3-port Y-valve; can be customized: 3-port distribution valve, 4-port valve, T-valve, globe valve or no valve

Valve transposition time: ≤250ms (between two adjacent ports)

Fluid path material: borosilicate glass, teflon, teflon

The maximum pressure reference value of the liquid circuit: 0.68Mpa

Signal input: 2-way TTL level signal input (driving current>16mA) is used to control restart after static pause command

Signal output: 3-way OC gate signal output, used to indicate the working state

Applicable power supply: DC 24V/1.5A

Communication interface: RS485/RS232 can be set

Device address setting: BCD DIP switch (0-E corresponds to device communication address: 1-15)

Communication rate: 9600bps/38400bps can be set

Device DIP setting: 6-bit DIP DIP switch (communication interface, communication rate, etc.)

Applicable syringe specifications: 50uL, 100uL, 250uL, 500uL, 1mL, 2.5mL, 5mL, 10mL, 25mL

Working environment: temperature 15℃-40℃, relative humidity <80% (mainly determined by the temperature characteristics of the PTFE material in the syringe)

Dimensions (L×W×H): 114x65x254mm

Drive weight: 2.15Kg

Rated power: 30W

Main Features of SP60-1A Industrial Syringe Pump

SP60-1A industrial syringe pump is mainly suitable for high-precision continuous transmission, dilution and distribution of trace liquids, etc.

SP60-1A industrial syringe pump is driven by stepper motor, combined with clearance compensation screw drive, with high precision and transmission stability.

The material of the valve body and liquid path has excellent chemical properties and is suitable for various neutral and corrosive liquids.

Convenient control, process automation with programmed tasks, and easy programmable operation.

Embedded panel installation, can be used for various supporting equipment, easy and fast installation.

Wide range of syringes 50ul-25ml optional

Diversified control can be offline automatic operation or external communication control, support RS232, RS485

Flow parameters of SP60-1A single-channel perfusion syringe pump

Syringe (or injector) specification 50μl: theoretical minimum flow 0.0025 (ml/min), theoretical maximum flow 2.5 (ml/min)

Syringe (or injector) specification 100μl: theoretical small flow 0.005 (ml/min), theoretical maximum flow 5 (ml/min)

Syringe (or injector) specification 250μl: theoretical minimum flow 0.0125 (ml/min), theoretical maximum flow 12.5 (ml/min)

Syringe (or injector) specification 500μl: theoretical small flow 0.025 (ml/min), theoretical maximum flow 25 (ml/min)

Syringe (or injector) specification 1ml: theoretical minimum flow 0.05 (ml/min), theoretical maximum flow 50 (ml/min)

Syringe (or injector) specification 2.5ml: theoretical small flow 0.125 (ml/min), theoretical maximum flow 125 (ml/min)

Syringe (or injector) specification 5ml: theoretical minimum flow 0.25 (ml/min), theoretical maximum flow 250 (ml/min)

Syringe (or injector) specification 10ml: theoretical minimum flow 0.5 (ml/min), theoretical maximum flow 500 (ml/min)

Syringe (or injector) specification 25ml: theoretical minimum flow 1.25 (ml/min), theoretical maximum flow 1250 (ml/min)

Typical application of SP60-1A single channel perfusion syringe pump

Dispenser, biological analysis, microfluidic chip automatic slide chromosome analysis, DNA sequencing

Account information

Company name：Baoding Rongbai Precision Pump Manufacturing Co.,Ltd

Operating Geology：Room 522,No.4 Building,Diangu Science and Technology Center,NO.3088 Lekai North Street,Baoding City,Hebei Province,China

USD account：13050166520800001059

Euro account：13050166520800001060

SWIFT CODE：PCBCCNBJXXX

国内对公转账支付

单位名称：保定融柏恒流泵制造有限公司

统一社会信用代码：91130605MA0F2P4F8C

开户行：中国建设银行股份有限公司保定竞秀支行

账号：13050166520800000939

行号：105134000074

地址：保定市乐凯北大街3088号电谷科技中心院内4号楼622房间

电话：0312‐5893777

(注意：税号 0 均为数字 0，没有字母 O)

对公二维码支付

About invoices: support paper invoices, electronic invoices
 

About logistics: If you have special needs, please coordinate and communicate with the pre-sales staff
 

About exchange: due to special circumstances such as flow difference, use environment, personal reasons, etc. due to model selection or actual application, on the premise of not affecting secondary sales, you can directly contact Rongbai constant current pump for exchange
 

After-sales guarantee: one year warranty (except consumables, improper use or man-made damage is not covered by the warranty)
 

Technical support: Affected by the epidemic, only online, remote, video and other technical support are currently available